Intend Samurai XC Fork

$2,690.00

In stock

Wheel Size
  • Free shipping on orders over $129
  • Dispatched within 2 business days
  • 30-day returns
  • Genuine products from leading brands
  • Based in QLD

SKU: INTEND:INT-SAMURAI-XC

Description

Downhill manners in a 1.5kg cross-country fork

The Intend Samurai XC is the lightest fork Intend make and one of the very few upside-down XC forks you can actually buy. At around 1505g (29") it weighs the same as the big-brand race forks, but it's built with the same obsession that goes into Intend's enduro forks, so it keeps its composure when the descent gets rowdy.

A redesigned crown and smaller dropouts cut weight and, just as importantly, reduce the leverage on the bushings. Less leverage means less friction and less wear, so the fork stays smooth for longer.

It's fitted with Intend's own Energizer lockout cartridge: the same piston design as their gravity forks, in a package as light as a RockShox Charger Race Day, with a 3-position lever: Open, Gravel (firm but still moving) and Road (99% locked, it eases into sag for a solid climbing position). Travel is set internally anywhere from 100 to 130mm in 10mm steps.

Riding the new 32" wheels? The Samurai XC 32 is the first 32" suspension fork you can actually buy: same idea, 35mm stanchions, 1620g, 48mm offset (46mm at sag).

  • It's the lightest Intend fork, built for XC racing and downcountry bikes with 100-130mm of travel.
  • Want more travel but still light? The Samurai SuperTR runs 140-170mm at only 1710g.
  • Riding a modern trail bike? The Hero (140-170mm) uses the full gravity damper and spring.

Where does the Samurai XC sit in the range?

Fork Travel Weight Built for What sets it apart
Samurai XC 29" (this fork) 100-130mm 1505g XC, downcountry Lightest Intend. Energizer 3-position lockout
Samurai XC 32" (this fork) 100-130mm 1620g XC, trail (32" wheels) 35mm stanchions, lockout + progression
Samurai SuperTR 140-170mm 1710g Downcountry, trail, light enduro Samurai weight with trail travel
Hero 140-170mm 2030g Trail, all-mountain, enduro OPTimized cartridge + Smooth Operator
Essential 150-170mm 2150g Trail, all-mountain, enduro Best value. Easy-service semi-open damper
Edge 150-180mm 2165g Enduro, racing Extra-sturdy legs, heavy-duty axle
Flash 35 160-190mm 2350g Enduro, freeride, e-MTB Reinforced crown, 15 or 20mm axle
Flash 38 160-190mm 2625g Freeride, bike park, big e-bikes 38mm stanchions, burliest chassis

Ordered lightest to burliest. Weights are Intend's claimed figures. Blackline versions of Hero, Edge and Flash 35 add forged one-piece lowers, stanchion guards and Racing Bros wipers. The full spec chart (dampers, adjustments, axles, brake mounts) is in the product photos.

The Inside Line:
Short-travel bike, long-travel attitude? This is the fork. Light enough for the race tape, composed enough that you'll start "accidentally" taking the black line home.

Features:

  • Upside-down XC / downcountry fork
  • Travel: 100-130mm, internally adjustable in 10mm steps
  • Weight: 1505g (29"), ~1470g cut with starnut; 1620g (32")
  • Damping: Intend Energizer cartridge with 3-position lockout (Open / Gravel / Road)
  • Adjust: lockout, rebound, compression, air pressure
  • Axle: 15x110mm Boost
  • Brake mount: 180mm post mount or 180mm flat mount (160mm not possible)
  • Steerer: tapered 1 1/8" - 1.5", 240mm long
  • Offset: 44mm (29"), 48mm extended / 46mm at sag (32")
  • Axle-to-crown (29"): 541mm at 130mm, 531mm at 120mm, 521mm at 110mm
  • Axle-to-crown (32"): 580mm at 130mm, 570mm at 120mm
  • Lowers: champagne-coated tubes with pressed-on dropouts
  • EFBE AM/EN rated
  • Made by hand in Freiburg, Germany

Technologies:
Energizer lockout cartridge
Intend took the pistons from their enduro forks and packed them into a cross-country cartridge. The compression piston sits up top (needed for a crown lockout) while the seal head is placed so lube oil can't drain down the leg. 130mm max stroke, 3 positions, and properly good damping.
Upside-down (USD) chassis
The big tubes sit up top in the crown and the thin stanchions slide into them at the bottom. That puts the stiffest, strongest part of the fork where the loads are highest, keeps the seals permanently bathed in oil (super-supple off the top) and drops unsprung weight at the axle. The trade-off: no fork brace, so the axle and its clamp do the work of keeping the legs in sync, and the exposed stanchions want a little care (or the Blackline guards).
Hand-built, one at a time
Every Intend fork is assembled by hand in Freiburg by riders, not robots. The crown and uppers are bonded with high-strength Loctite so the chassis stays stiff and creak-free (Intend quote 99.98% of forks never creak), each bushing is sized to its own tube so nothing binds, every fork is checked for perfectly parallel tubes, and the lowers get exactly 15ml of Motorex Supergliss 32K/68K lube. No guesswork, no "close enough".

Notes:

  • Wheel size option: 29" (Samurai XC) or 32" (Samurai XC 32).
  • Some Samurai versions use a RockShox Charger Race Day cartridge instead (max 120mm); ask us if you want that setup.
  • Steel-braided brake hoses are not recommended on USD forks.
  • No 160mm brake mount option.

Setup:

  • Start at about 1.0 psi per kg of rider weight (with gear), then fine-tune. E.g. 80kg rider = ~80psi.
  • Rebound: start mid-range, then adjust so the front wheel doesn't leave the ground when you push down and let go quickly.
  • Lockout: Open for descending, Gravel for rough climbs and fire roads, Road for smooth climbs and tarmac.
  • Torques: axle clamp bolts 10Nm, axle 5Nm, brake mount bolts 4Nm.
  • Full step-by-step guide, oil volumes and torque specs: Intend Fork Setup Guide. Video how-tos: Intend on YouTube.

Service:

  • Intend recommend a factory service at least once a year (lube oil, damper oil, inspection). Lower-leg and seal service is simple and needs no special tools.
  • Service intervals, oil types and quantities: Intend Fork Setup Guide. Factory service options: Intend Service & Tech.
  • Want us to look after it? Get in touch and we'll arrange service or a rebuild through the Australian distributor.

Need a hand choosing?

Not sure which Intend suits your bike and riding? Send us your bike, current fork, rider weight and the trails you ride, and we'll point you to the right model and travel. Intend forks are built in small batches, so please contact us for current availability and lead time before ordering.

Learn more:

Shipping and returns

See our shipping policy for delivery options and times, and our refund policy for returns.