Skip to product information
1 of 6

Peaty's Tubeless Rim Tape - 35mm

Peaty's Tubeless Rim Tape - 35mm

Regular price $34.00 AUD
Regular price $34.00 AUD Sale price $34.00 AUD
Sale Sold out
Tax included.

Pro riders, mechanics and scientists alike collaborated on Peaty’s Rim Job Rim Tape. Developed from the ground up as a bicycle rim tape the super high tensile strength tape is primed with a bespoke adhesive for extra grip. 

An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit. Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way. 

One 9 Meter roll will handle:

  • 5x 26" Rims
  • 4x 27.5" Rims
  • 4x 29" Rims
  • 4x 700c rims

The Inside Line:
Easy to apply rim tape that takes the hassle out of going tubeless. Combine with Peaty's tubeless sealant and valves to get that tubeless conversion underway. 

Features:

  • Constructed from dual-layered, high tensile strength film. unique cold-foil silver logos are sandwiched between two layers of film for a long-lasting premium finish.
  • Primed with a bespoke adhesive, our tape forms a strong air-tight seal with your rim, yet leaves little to no mess behind when removed!
  • An optimum amount of stretch and a large, rigid recyclable core allows the tape to be pulled and applied with tension, contouring to your rim tightly for a better fit.
  • Transparent design makes finding the valve hole easy.
  • Cloth finishing strips included for a perfect seal (5x per 9m roll)

Sizing: 

  • 35mm wide 

Fitting:

  1. Remove tyre and any old rim tape - Use Disc brake cleaner to remove any grease.
  2. Clean and degrease rim thoroughly, ensuring rim is completely dry before application.
  3. Starting two spokes behind the valve hole, press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air.
  4. Run tape around the rim while keeping tape tension, finishing two spoke holes beyond the valve hole.
  5. Check for any trapped air underneath the rim tape - push air bubbles out to a spoke hole to remove.
  6. Cover the end of the tape with a strip of the finishing tape provided to prevent peel back.
  7. Use a small spike to pierce the tape in the centre of the valve hole.
  8. Remove dust cap, lock ring and o-ring then push valve stem through the valve hole.
  9. Re-apply the o-ring and apply lock ring tightly by hand, ensuring there are no air gaps.
  10. Refit tyre, add peaty’s tubeless sealant.
  11. Inflate tyre to desired pressure.
  12. RIDE!
View full details